5 mm x 7 mm ceramic low noise smd oscillator, ism73 ? series lvcmos / lvpecl / lvds ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 07/09/12_a specifications subject to change without noti ce page 1 pin connection 1 enable/disable or n.c. 2 enable/disable or n.c 3 ground 4 output 5 output or n.c. 6 v dd 5 . 0 8 4.2 1.9 bypass =0.01 uf 7.0 0.3 5.0 0.2 dimension units: mm recommended pad layout 1 . 1 7 1.4 5.08 1.9 max. 2.0 frequency lvcmos lvpecl lvds 10 mhz to 225 mhz 10 mhz to 1500 mhz 10 mhz to 1500 mhz output level lvcmos lvpecl lvds voh=90% vdd min., vol=10 % vdd max. voh=vdd-1.03v max. (nom. load), vol=vdd-1.6v max. (nom. load) vod=(diff. output) 350mv typ. duty cycle lvcmos lvpecl lvds 50% 5% @ 50%vdd 50% 5% @ 50%* 50% 5% @ 50%* rise / fall time lvcmos lvpecl lvds 3.0 ns max. (90%/10%)* 0.6 ns max. (80%/20%)* 0.6 ns max. (80%/20%)* output load lvcmos lvpecl lvds 15pf 50 ? to vdd - 2.0 vdc rl=100 ? /cl=10pf frequency stability see table below supply voltage 3.3 vdc 10%, 2.5vdc 5% current lvcmos = 25 ma max., lvpecl = 60 ma max., lvds = 35 ma max. phase jitter (rms) at 12khz to 20 mhz 0.5 ps typical operating temp. range see table below storage -40 ? c to +100 ? c part number guide sample part number: ism73?31a9h2?155.520 package input voltage operating temperature stability (in ppm) output enable / disable complimentary ouput (pin 5) ** frequency ism73 3 = 3.3v 1 = 0 ? c to +70 ? c f = ? 20 3 = lvcmos h = enable (pin 1) 1 = n.c. -155.520 mhz 6 = 2.5v 3 = -20 ? c to +70 ? c a = ? 25 8 = lvds k = enable (pin 2) 2 = output 2 = -40 ? c to +85 ? c b = ? 50 9 = lvpecl note: a 0.01 f bypass capacitor is recommended between v dd (pin 6) and gnd (pin 3) to minimize power supply noise. * measured as percent of waveform. ** available on lvds and lvpecl ouput only . product features applications small surface mount package xdsl ethernet/lan/wan low rms phase jitter broadcast video optical modules frequencies to 1500 mhz wireless base stations clock and data recovery pb free/ rohs compliant sonet /sdh fpga/asic leadfree processing wimax/wlan backplanes server and storage gpon
5 mm x 7 mm ceramic low noise smd oscillator, ism73 ? series lvcmos / lvpecl / lvds ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 07/09/12_a specifications subject to change without noti ce page 2 typical application: pb free solder reflow profile: *units are backward compatible with 240c reflow processes package information: msl = n.a. (package does not contain plastic, storage life is unlimited under normal room conditions). termination = e4 (au over ni over w base metalization). tape and reel information: quantity per reel 1000 a 16 +/-.3 b 8 +/-.2 c 7.5 +/-.2 d 17.5 +/-1 e 50 / 60 / 80 f 180 / 250
5 mm x 7 mm ceramic low noise smd oscillator, ism73 ? series lvcmos / lvpecl / lvds ilsi america phone: 775-851-8880 ? fax: 775-851-8882? e-mail: e-mail@ilsiamerica.com ? www.ilsiamerica.com 07/09/12_a specifications subject to change without noti ce page 3 environmental specifications thermal shock mil-std-883, method 1011, condition a moisture resistance mil-std-883, method 1004 mechanical shock mil-std-883, method 2002, condition b mechanical vibration mil-std-883, method 2007, condition a resistance to soldering heat j-std-020c, tabl e 5-2 pb-free devices (except 2 cycles max) hazardous substance pb-free / rohs / green compliant solderability jesd22-b102-d method 2 (preconditioning e) terminal strength mil-std-883, method 2004, test condition d gross leak mil-std-883, method 1014, condition c fine leak mil-std-883, method 1014, condition a2, r1=2x10-8 atm cc/s solvent resistance mil-std-202, method 215 marking line 1: ilsi and date code (yww) line 2: frequency
|
